ISO 7326 ADT angular contact ball bearings

A:21 mm; T min.:-40 °C; Weight:1.63 kg; Recommended tightening torque for set screw:5.5 Nm; A5:12.6 mm; H:78 mm; C0:4.78 kN; B1:28.6 mm; B:19.1 mm; SW:3 mm;

T max.:100 °C; N:38mm; A4:74 mm; s1:86.5 mm; Weight:31.05 kg; Recommended tightening torque for set screw:65.2 Nm; J:242 mm; B:100 mm; A2:117.6 mm; d1:146 mm;

Maximum Capacity / Filling Slot:No; Internal Clearance:C0-Medium; UNSPSC:31171504; Fatigue limit load, Cu:0.09 kN; Max operating temperature, Tmax:80 °C; rs min:0.3 mm; Cage Material:Steel; Long Description:10MM Bore; 26MM Outs; Static load, C0:1.96 kN; Category:Single Row Ball Bear;

Housing Type:Piloted Flange; Retainer Type:Std Retainer; Shaft Attachment (2):Set Screw; Bearing Series:214 Series; Bearing Inner Ring Material:Steel; Seal Type:Single Lip; End Cap Groove:Yes; Ship Weight:10.99 LB; Max Bearing Speed:3000 rpm; d:70.0000 mm;

T max.:100 °C; B1:77.7 mm; C0:32.8 kN; A1:36 mm; J:114 mm; Dz:120 mm; Z:111.2 mm; d:60 mm; A:68 mm; Designation of housing:PA212N-;

Designation of open end cover:SCOU207-23; H:47.6 mm; H1:19 mm; Designation of bearing:UC207-23G2; T min.:-20 °C; L:167 mm; T max.:100 °C; Recommended tightening torque for set screw:8 Nm; J:127 mm; S:17.5 mm;

Bearing Bore Shape:Round; Retainer Type:Max Life Cage; Bearing Inner Ring Material:Steel; Bearing Family:Setscrew Ball Bearin; Seal Type:Triple Lip; Ship Weight:3.08 LB; Expansion Type:Non-Expansion; UPC:782476254803; Self Aligning:Self Centering; Ring Size:Standard;

A1:18 mm; S:6 mm; Designation of bearing:US202-10G2T04; T max.:100 °C; L:63 mm; Weight:0.38 kg; Z:15.9 mm; E:10 mm; H2:57 mm; H1:9 mm;

J:171 mm; G:M6x1; d:55.56 mm; Designation of housing:P211N-; L:219 mm; L1:70 mm; C:43.55 kN; Dz:110 mm; T min.:-40 °C; T max.:100 °C;

Housing Type:3 Bolt Light Duty Fl; Bearing Outer Ring Material:Steel; Bearing Family:Setscrew Ball Bearin; Grease Type:Unirex N2; Bearing Duty:Intermediate Duty; Flinger Material:None; Bearing Insert Material:Steel; UPC:782475510375; Ship Weight:1 LB; Housing Coating:Powder Coat;

N:14mm; B:49.2 mm; Z:25.5 mm; T min.:-20 °C; d:42.86 mm; A1:35 mm; G:M6x1; H:52.4 mm; L:197.5 mm; H1:18.4 mm;

C0:18.2 kN; d:38.1 mm; L:110 mm; H1:20 mm; T min.:-20 °C; T max.:100 °C; Designation of housing:PG208N-; N:M12; J:78 mm; H2:98 mm;

Housing Coating:Powder Coat; Ball Bearing Housing Series:207 Series; Max Bearing Speed:5500 rpm; Grease Type:Unirex N2; Seal Type:Single Lip; Shaft Attachment (2):Set Screw; Housing Type:2 Bolt Pillow Block; Bearing Family:Setscrew Ball Bearin; Ball Material:Steel; Anti-Rotation Pin:Yes;

A2:40.7 mm; A:30.5 mm; s1:32.55 mm; T max.:200 °C; J:160 mm; C:52.5 kN; S:25.4 mm; N:18mm; T min.:-20 °C; Recommended tightening torque for set screw:16.8 Nm;

Outer rings PCD:83 mm; D:95 mm; Mounting Hole Countersink Diameter:8 mm; Mounting Hole Size:4.5 mm; Number of Mounting Holes:8; Dynamic Load Rating:18.9 kN; Chamfer:0.6 mm; Mounting Hole Countersink Depth:4.4 mm; Inner rings PCD:45 mm; Oil Holes:3 mm;