Toyana NJ5214 cylindrical roller bearings

Mass bearing:115 kg; Comparative radial load rating CF:620 kN; Thrust factor K:1.76; Basic static load rating C0:4400 kN; Fatigue load limit Pu:365 kN; r3,4 min.:3.3 mm; Calculation factor Y2:3; Basic dynamic load rating C:1373 kN; B:146.05 mm; Design variant/feature:TDI/WIY2;

Type:300-RDM Series (from; Fillet Radius ra:3.00 mm; Speed Rating-Open and Shielded-Oil OSO:6700 rpm; Basic Radial Load Rating-Static SCO:475000 N; D:320.0000 mm; Fillet Radius rb:1.00 mm; Basic Radial Load Rating-Dynamic DC:390000 N; B:65.00 mm; d:150.000 mm; Speed Rating-Open and Shielded-Grease O

Dimension A1:1.3750 in; Height H:6.1250 in; Basic Static Radial Load Rating Co:3440 lbf; Dimension A2:0.6563 in; Distance J:5.1250 in; Basic Dynamic Radial Load Rating:4560 lbf; Height T:1.8281 in; Shaft Diameter D:1 1/4 in; Dimension L:3.7813 in; Diameter N:0.5469 in;

D:22.0000 mm; Fillet Radius ra:0.30 mm; Grease Speed Rating Open/Shielded n1:36000 rpm; d:8.000 mm; Accessories:Synthetic Rubber Sea; Basic Static Radial Load Rating Co:1370 N; Oil Speed Rating Open/Shielded n2:43000 rpm; Sealed Speed Rating n3:23000 rpm; Basic Dynamic Radial Load Rating C:3250 N; B

F:195 mm; rs (min):3 mm; Pu:60.330 kN; b:12 mm; Dynamic (Ca):511 kN; s:2.5 mm; r1s (min):3 mm; E:mm; d2 (max):207.4 mm; Static (Coa):631 kN;

Basic dynamic load rating C:8150 kN; Mass bearing:590 kg; da max.:820 mm; s1 max.:41.1 mm; r1,2 min.:7.5 mm; ra max.:6 mm; Misalignment factor k1:0.121; D:980 mm; D1 ≈:905 mm; Operating clearance factor k2:0.101;

Ew:45 mm; Limiting speed:12000 r/min; Basic static load rating C0:32.5 kN; Fatigue load limit Pu:3.8 kN; U:13 mm; Mass needle roller and cage assembly:0.018 kg; Basic dynamic load rating C:16.8 kN; Reference speed:10000 r/min; Fw:40 mm;

Basic Static Radial Load Rating Co:1180 N; Basic Dynamic Radial Load Rating C:5530 N; D:30.0000 mm; Fillet Radius ra:0.60 mm; B:14.00 mm; Grease Speed Rating n1:17000 rpm; d:10.000 mm;

B:100 mm; r3,4 min.:2.1 mm; ra max.:2 mm; Fatigue load limit Pu:315 kN; r1,2 min.:2.1 mm; b1:9.4 mm; D:480 mm; Calculation factor kr:0.2; D1 ≈:447 mm; d1 ≈:419 mm;

ba:75.406 mm; J1:117.475 mm; H2:76.2 mm; RG:3/4 NPT; S:4.763 mm; PG:1/4 NPT; P150°:173 kN; H:377.825 mm; N1:28.575 mm; da:163.512 mm;

A3:3.2 mm; s1:25.9 mm; Bearing:YSPAG 208-108; L:130 mm; J6:118 mm; A:38.5 mm; A1:14 mm; Recommended tightening torque for grub screw:7.4 N·m; J:101.5 mm; Hexagonal key size for grub screw N:3 mm;

RG:1 NPT; S:4.763 mm; P90°:218 kN; da:180.975 mm; N1:34.925 mm; ba:83.344 mm; Bearing:22240 CCK/W33; h:62.706 mm; A1:203.2 mm; Initial grease fill:2154.6 g;

db min.:108.5 mm; Basic dynamic load rating C:460 kN; C:44 mm; Calculation factor Y0:0.8; rb max.:2.5 mm; Ca min.:9 mm; Calculation factor e:0.4; B:58 mm; D:170 mm; Fatigue load limit Pu:62 kN;

da:79.375 mm; Da:160 mm; Max. speed for PosiTrac Plus seal:1800 r/min; P120°:38.3 kN; Housing:FSAF 518; J min.:263.525 mm; Cap bolt recommended tightening torque:149.1 N·m; P90°:60.9 kN; Mass pillow block:22.4 kg; Stabilizing ring:SR-18-15;

B:63 mm; r, r1,2 min.:1.1 mm; F:100 mm; Mass inner ring:1.05 kg; d:85 mm;