40 mm x 90 mm x 23 mm SNR AB44059S01 deep groove ball bearings

Flange Shape:Round Type; Bearing Retained:Yes (with retaining; Width T(mm):35 ～ 70; Seals:VV (Non-Contact Rubb; Holder Surface Treatment:Clear Anodize; Number of Bearings:Double; Shape:Flange Type; Shape:Flange Type; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6804;

Bearing Retained:Yes (with retaining; Mount Type:Base Face Type; Width T(mm):13; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Single; Seals:VV (Non-Contact Rubb; Bearing Part Number:6903; Lateral Width L(mm):64; Housing Material:[Aluminum Alloy] Alu;

A2:51 mm; A:70 mm; Designation of bearing:UK216G2H-43; L2:21 mm; N2:70 mm; L1:140 mm; H:184 mm; d:68.26 mm; B:44 mm; H2:111 mm;

Bearing Used:Deep Groove Ball Bea; Flange Shape:Square Type; Type:Bearings with Housin; Housing Material:1045 Carbon Steel; Width T(mm):25 ～ 35; Flange O.D. H(φ):44; Number of Bearings:Double; RoHS:6; Days to Ship:7 Days; Type:Bearings with Housin;

Unit Body Material:Cast Iron; Bearing Unit, Type:Square flange shape; Rolling Element Material:Bearing Steel; Diameter series symbol:Used for Light load; Stroke:No; Bearing Inner Dia. Shape:Tapered hole adapter; Seal:Silicone; Accessory:No Cover; Stroke:No; Bearing Inner Dia. Shape:Tapered hole adap

Da max:28 mm; B:10 mm; Maximum Capacity / Filling Slot:No; da max:17 mm; Internal Clearance:C3-Loose; Internal Special Features:No; Min operating temperature, Tmin:-25 °C; Inner Race Width:0 Inch | 0 Millimete; Rolling Element:Ball Bearing; Snap Ring:No;

Weight:1.76 kg; Dz:88 mm; N:14mm; Designation of housing:FLE208N-; A:37.5 mm; C0:18.2 kN; Designation of closed end cover:SCC208; T max.:100 °C; S:19 mm; H:172 mm;

A5:22 mm; L:274 mm; S:8 mm; A:21 mm; Designation of bearing:US206-18G2; Designation of housing:SP206-207/62-; T max.:100 °C; C:19.5 kN; H:98 mm; T min.:-20 °C;

Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Days to Ship:7 Days; Bearing Retained:Yes (with retaining; Seals:DD (Contact Rubber S; Bearing Part Number:6001; Bearing Used:Deep Groove Ball Bea; Flange O.D. H(φ):52; Volume Discount:Available; Bearing I.D. d(mm):12;

Material Bearing:52100 Bearing Steel; Surface Treatment:Not Provided; RoHS:6; Pillow Type, Category:Standard; Unit Body Material:[Cast Iron] Zinc All; Bearing Inner Dia. Shape:Set Screw; Volume Discount:Available; Basic Load Rating Cr (Dynamic)(N):6000; B:24; Bearing Unit, Type:Pillow Blocks;

Shape:Flange Type; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Flange O.D. H(φ):41; Days to Ship:7 Days; Type:Bearings with Housin; Seals:DD (Contact Rubber S; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):10;

ra max:3 mm; Number of lubrication holes:8; b:16 mm; Da max:445.4 mm; db min:313 mm; Y1:3.07; Fatigue limit load, Cu:251 kN; Characteristic cage frequency, FTF:0.46 Hz; Nref:1,000 rpm; Y0:3;

Inch - Metric:Metric; Snap Ring:No; D:26 mm; Max operating temperature, Tmax:120 °C; da min:19 mm; ra max:0.3 mm; Other Features:Deep Groove | Prelub; Rolling Element:Ball Bearing; Bore:0.669 Inch | 17 Mill; rs min:0.3 mm;

d1:27.2 mm; C0:4.78 kN; Z:41.5 mm; N:10mm; L:60 mm; A1:12 mm; Recommended tightening torque for set screw:5.5 Nm; B1:28.6 mm; Weight:0.37 kg; e:15 mm;

Unit Body Material:Cast Iron; Fit:J7; Grease Type:Standard Grease; Fit:J7; Surface Treatment:No; Stroke:No; Bearing Unit, Type:Pillow Type; Bearing Unit, Type:Pillow Type; Surface Treatment:No; Accessory:With cast iron cover;